咚拍拍 嘻拍拍

Canon 官方正式發佈了 EOS MOVIE 的 FCP 外掛
安裝後便能用 FCP 中的 Log & Transfer 來匯入 EOS MOVIE 檔
這樣一來就能選擇要轉換成不同類型的 ProRes 格式，還能用 FCP7 的更名機制

下載網站 [點我]
*要把 Drivers / Software Selection 的 OS 下拉選單選到 Mac OS X，便可在 [Software] 中的第一項看到下載鏈結

底下是安裝過程。步驟超簡單，咻一下就結束了！

原文說明
This plug-in application is for Final Cut Pro, which was released for users of EOS Digital and Final Cut Pro. This plug-in allows you to use the Log and Transfer function to edit movies captured with the EOS cameras.
1. Major functions ProRes codec can convert original EOS movie files into ProRes-format files at a high speed. Reel name codes and time-code (time-stamp*1) are added to converted files.
2. Supported movies (*2) EOS-1D Mark IV EOS 5D Mark II new firmware (v2.0.3 or later) EOS 5D Mark II old firmware (v1.2.4 or ealier) EOS 7D.
*1: Not compatible with the Generator Lock.
*2: Standard Definition movies are not supported. For details, please see the instruction manual.

The following software must be installed on the PC
-Final Cut Pro6.0.6
-Final Cut Pro7.0.1 and later

Supported Models:
-EOS 5D Mark II(1920x1080/30fps)
-EOS 5D Mark II(Firmware v2.0.3 or later, 1920x1080/29.97fps, 1920x1080/25fps, 1920x1080/23.976fps)
-EOS 7D, EOS-1D Mark IV(1920x1080/29.97fps, 1920x1080/25fps, 1920x1080/23.976fps, 1280x720/59.94fps, 1280x720/50fps)

Supported OSes:
MacOS 10.6.2　or later

CPU:
In addition to the support conditions of Final Cut Pro, must be an Intel CPU

RAM, Display:
Same as the support conditions of Final Cut Pro

關於影片格式，也支援 5D mark II 升級到 2.0.3 後新增的格式
但 2.0.3 版已知存在 Audio 等問題，所以目前最新的軔體已更新為 2.0.4
請有意升級的朋友注意一下